This is for those with underwater photography, the environment do differently this learn the basics of shooting decent pictures in very much. Perhaps you have already given it a try and found that even though you take very good pictures taken on land, the shots with your underwater camera to come out dreadful.
The typical problems experienced by those on the basis that their images tend to:
Lack of color and appearance usually blue or blue-green
be covered by white circles orPoints that look like snow
Be a little blurry and lack of clarity
Lack of sharpness and contrast between the subject and
The good news is that these few tips are some basic challenges of the past to the point where you can start shooting some fair and then you'll be ready to start fine tuning your skills with experimentation and practice.
Blue images are usually the result of not using flash or a far away from. The problem is that waterabsorbs light very quickly, starting forward with the warmer colors such as red and yellow. In fact, red is disappearing at around 12 'to 15'. They have the best luck if you try and get within about 3 'of the subject.
Also consider that the light from your flash to the subject has begun traveling back to the lens, so if you are 5 feet away, has the light on 10 trips and the flash will not be very effective.
You should also remember from your dive training that water makes thingsFor larger and closer. About 25% to be exact. While it is true that the camera "sees" what you do in terms of size, it will not change for the long haul. So if you are close to the edge of the effective flash range, the other 25% may be sufficient to blow the shot.
Interestingly, the second problem, the so-called backscatter, is given with a flash. It is reflected by the flash causes tiny particles suspended in the water. It is generally of the use of camerasinternal flash is located very close to the lens.
The solution is an external flash or strobe, they can be used to position the side. In this way the light is reflected somewhere other than directly into the camera lens. A diffuser can also help to keep the light softer.
Blurry images are generally the result of the attempt by too much water to shoot. Back closer to the topic. to get In fact, when starting out and trying how to properly with a cameraUnderwater, it's a good idea to focus on macro photography. Get good at the work and then out.
Because water is denser than air, it is difficult to get the crispness and sharpness of the image in the country. One solution is to get closer. This will help better define the contrast between what it is you photograph and background. As you add a little contrast again, during the post at the computer, it is even better and try it right into the camera.
MaybeThey have a common theme here, remarked that come too close and an external flash. It will also help to low as on a par with the subject and try to shoot slightly upwards.
fact is in it a mantra that, "says come close, get low, shoot up, and use a flash. you are not yet built underwater photography only use these basic tips should results make a big difference in your .
No comments:
Post a Comment